Bedding Mortar is normally mixed in the ratio of 3:1, sand to lime, using our standard Lime Putty slaked at our works. The aggregate used is a blend of sharp sand and soft rounded sand giving maximum workability and durability.

Bedding of stonework, brickwork and blockwork.

Matures with age and as long as it is kept in a sealed container or bags there is no upper time limit.

Ex stock.

Alkali ph 13, skin, eyes and open sores must be protected.

The success of lime based mortars depends greatly on the tradesman being familiar with them and understanding that these mortars react very differently from modern cementitious mortars. Particular attention is needed towards, 1) the control of drying and hardening of the mortar, 2) the protection from frost and heat, 3) a basic understanding of where and when these mortars are suitable.